| Customization: | Available |
|---|---|
| Application: | Biotechnology Industry, Chemical industry, Clinical Diagnosis, Food & Beverage Factory, Food Safety, Forensic Science, Pharmaceutical Industry |
| Capacity: | Tbd |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Muti-effect distiller water machine is used to produce the WFI water in the pharmaceutical field.
Multi-effect distilled water machine usually consists of two or more evaporative heat exchangers, separation devices, preheaters, condensers, valves, instruments, and control components. Generally, the system has 3-6 effects, with each effect consisting of an evaporator, a separation device, and a preheater.
During the operation of a multi-effect distillation machine, the steam (pure steam) generated through each evaporator is used to heat the raw water, and in turn, more pure steam is generated in each effect. After heating and evaporating the raw water, it undergoes phase change condensation to become injection water. In the segmented evaporation and condensation process, only the first effect evaporator requires external heat source heating, and the pure steam generated by the final effect and the injection water generated by each effect are cooled through the condenser. Therefore, the energy saving effect is very obvious, and the more the efficiency, the better the energy-saving effect. That is to say, in order to reduce the consumption of steam and cooling water when the production of injection water is constant, it is necessary to increase the efficiency.
Water production<4000L/H
| type | Tube type | ||||
| Number of effect | 3 | 4 | 5 | 6 | |
| Ratio | QA/Q | ≤0.45 | ≤0.34 | ≤0.27 | ≤0.25 |
| QB/Q | ≤1.58 | ≤0.89 | ≤0.46 | ≤0.15 | |
| QC/Q | ≤1.15 | ≤1.15 | ≤1.15 | ≤1.15 | |
| type | Tube type | |||
| Number of effect | 5 | 6 | 7 | |
| Ratio | QA/Q | ≤0.27 | ≤0.25 | ≤0.22 |
| QB/Q | ≤0.46 | ≤0.15 | ≤0.05 | |
| QC/Q | ≤1.15 | ≤1.15 | ≤1.15 | |
Q - Injection water consumption measured per unit time L/h
QA - The amount of steam consumed per unit time to produce a certain amount of injection water L/h
QB - Cooling water consumption required to produce a certain amount of injection water per unit time L/h
QC - The amount of raw material water required to produce a certain amount of injection water per unit time L/h
Comparison Table of Testing Indicators for Injection Water in Pharmacopoeia of Different Countries
| Item | CP2010 | EP6.7 | USP32 |
| PH | |||
| PH | 5-7 | - | - |
| Nitrate | ≤0.000 006% | Maxi mum0.2ppm | |
| Nitrite | ≤0.000 002% | ||
| Ammonia | ≤0.000 03% | ||
| Conductivity | Comply with the regulations, different temperatures have different specified values, for example<1.1μS/cm@20ºC; <1.3μS/cm@25ºC; <2.5μS/cm@70ºC; <2.9μS/cm@95ºC; |
Comply with the regulations, different temperatures have different specified values, for example<1.1μS/cm@20ºC; <1.3μS/cm@25ºC; <2.5μS/cm@70ºC; <2.9μS/cm@95ºC; |
Comply with the regulations, different temperatures have different specified values, for example<1.1μS/cm@20ºC; <1.3μS/cm@25ºC; <2.5μS/cm@70ºC; <2.9μS/cm@95ºC; |
| Total organic carbon | <0.50mg/L | <0.50mg/L | <0.50mg/L |
| Easily oxidizable | - | - | - |
| Nonvolatile matter | 1mg/100ml | - | - |
| Heavy metal | <0.000 01% | Maxi mum0.1ppm | - |
| Bacterial endotoxin | <0.25EU/ml | <0.25EU/ml | <0.25EU/ml |
| Microbial limit | 10pcs/100ml | 10pcs/100ml | 10pcs/100ml |
Comparison Table of Testing Indicators for Injection Water in Pharmacopoeia of Different Countries
| Item | CP2010 | EP6.7 | USP32 |
| PH | |||
| PH | 5-7 | - | - |
| Nitrate | ≤0.000 006% | Maxi mum0.2ppm | |
| Nitrite | ≤0.000 002% | ||
| Ammonia | ≤0.000 03% | ||
| Conductivity | Comply with the regulations, different temperatures have different specified values, for example<1.1μS/cm@20ºC; <1.3μS/cm@25ºC; <2.5μS/cm@70ºC; <2.9μS/cm@95ºC; |
Comply with the regulations, different temperatures have different specified values, for example<1.1μS/cm@20ºC; <1.3μS/cm@25ºC; <2.5μS/cm@70ºC; <2.9μS/cm@95ºC; |
Comply with the regulations, different temperatures have different specified values, for example<1.1μS/cm@20ºC; <1.3μS/cm@25ºC; <2.5μS/cm@70ºC; <2.9μS/cm@95ºC; |
| Total organic carbon | <0.50mg/L | <0.50mg/L | <0.50mg/L |
| Easily oxidizable | - | - | - |
| Nonvolatile matter | 1mg/100ml | - | - |
| Heavy metal | <0.000 01% | Maxi mum0.1ppm | - |
| Bacterial endotoxin | <0.25EU/ml | <0.25EU/ml | <0.25EU/ml |
| Microbial limit | 10pcs/100ml | 10pcs/100ml | 10pcs/100ml |
1.What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.
2.How will your company control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .
3.How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .
4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
5.Can we become your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.
6.Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life .
2. We decrease the consumption cost of the product in the ruuning.
3. We improve research personnel's ability to deliver a creative design;
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.
){kind=link}