Seeds Fruits Roots Stems Hot Solvent Extraction Equipment Reflux Soxhlet Extractor

• Customization: Available
• After-sales Service: Online Video Technical Support
• Warranty: 1 Year
• Type: Extraction Equipment
• Installation: Vertical
• Centrifuge Type: Tube Centrifuge
• Distillation Equipment Type: Steam Distillation Equipment
• Extraction Tower Type: Turntable Tower
• Condition: New
• Steam Pressure: 0.2-0.3 MPa
• Extractor Tank Volume: 1000-6000L
• Evaporator Capacity: 500-2000kg/H
• Heating Area: 6.2-25 M2
• Condenser Area: 21-82 M2
• Dimension: Tbd
• Material: Stainless Steel 304/316/316L
• Transport Package: Tbd
• Specification: 500-5000L
• Trademark: Joston
• Origin: Wenzhou
• Production Capacity: 30 Sets/Month

Product Description

 

Product Photos

 

 

 

 

Product Composition

Multifunctional thermal reflux extractor and concentrator machine including extractor tank, single effect concentrator,condenser, oil/water separator,sub-cooler,water(solvent)collection tank, automatic drain system.pipeline, control panel and platform. 

Working principle

The extractor solution outlet from the bottom of the extractor tank to the single effect concentrator to evaporate, and the evaporated solvent (water) condensate then reflux back to the extractor tank as the fresh solvent (water) . The fresh solvent (water) mixture with the extraction solution completely and evaporate again, till to extractor all the active ingredient from the raw material herbs and natural product.
   

Usage and characteristic

Multifunctional thermal reflux extractor and concentrator machine can fit the different processes of extraction & concentration condition :
This machine have complete functions ,can be used to for the different type extraction process for different type raw material:
1.Water based extractor --vacuum concentrator process : traditional herbal or natural product raw material are put into the inside shell extraction tank via top manhole ,the water charged from the inlet nozzle , and the jacket can be heating by steam . After boiling in the inside shell tank, the heat source is reduced, and the boiling in the tank is maintained.for sometimes The maintenance time is determined according to the extraction process. If the extraction is closed type ( which equipped with the condenser ,sub-cooler ), cooling water is needed to cool the vapor gas in the condenser and condensate water return back to the extraction tank to maintain circulation and temperature.after the extraction process ,the extraction solution will be transferred out from the bottom filter net of the extractor tank to the storage tank by transfer pump or vacuum pump ,the extraction solution will be evaporated in the concenentrator ,the heating tank of the concentrator unit will be heating by steam and keep the inside extraction solution will be keep the water boiling temperature in low temperature ( which is under vacuum ) ,the water will be vapor and cooling by the condenser ,the water will be drain ,the extraction ointment (product ) will be get from the concentrator unit .after finished the extraction and concentrator ,the residue raw material will be discharge by opening the bottom pneumatic discharge gate. Of extraction tank  
2.Solvent based extractor --concentrator process: traditional herbal or natural product raw material are put into the inside shell extraction tank via top manhole ,the solvent (like ethanol etc) charged from the inlet nozzle , and the jacket can be heating by steam . After boiling in the inside shell tank, the heat source is reduced, and the boiling in the tank is maintained.for sometimes The maintenance time is determined according to the extraction process. If the extraction is closed type ( which equipped with the condenser ,sub-cooler ), cooling water is needed to cool the vapor gas in the condenser and condensate water return back to the extraction tank to maintain circulation and temperature.after the extraction process ,the extraction solution will be transferred out from the bottom filter net of the extractor tank to the storage tank by transfer pump or vacuum pump ,the extraction solution will be evaporated in the concenentrator ,the heating tank of the concentrator unit will be heating by steam and keep the inside extraction solution will be keep the solvent boiling temperature ,the solvent will be vapor and cooling by the condenser ,the solvent will be kept in the storage tank ,the extraction ointment (product ) will be get from the concentrator unit .after finished the extraction and concentrator ,the residue raw material will be discharge by opening the bottom pneumatic discharge gate. Of extraction tank 
3.Soxhlet extractor --concentrator process: traditional herbal or natural product raw material are put into the inside shell extraction tank via top manhole ,the water or solvent (like ethanol etc) charged from the inlet nozzle , and the jacket can be heating by steam . After boiling in the inside shell tank, the heat source is reduced, and the boiling in the tank is maintained.for sometimes then close the jacket heating of the extractor tank ,open the extractor solution outlet valve of the extraction tank to make the solution enter into the concentrator unit ,then open the steam heating valve for the concentrator unit,to make the vapor from the concentrator tank reflux back to the extractor tank ,so keep running sometimes ,then close the reflux back valve to the extractor tank ,and open the vapor valve to the condenser ,make the the water or solvent will be vapor and cooling by the condenser ,the solvent will be kept in the storage tank ( water can be drain directly ) ,the extraction ointment (product ) will be get from the concentrator unit .after finished the extraction and concentrator ,the residue raw material will be discharge by opening the bottom pneumatic discharge gate. Of extraction tank 
4.Recovery of solvent solution in the residue raw material process: for the solvent based extractor process ,after transfer the extraction solution ,the residue raw material still content lots solvent solution ,as usual before discharge the residue ,we need recovery the solvent in the raw material ,the method should be similar as the essential oil distill method as above . steam can be heating in jacket or distill inlet inside of extraction tank ,the solvent will be vapor  and Turn on the cooling water to the condenser and chiller for the sub-cooler, so that the rising vapor state solvent with water can be condensate via the condenser and sub-cooler ,the solvent solution will be collected there .after finished the solvent recovery process,the residue material will be discharge by opening the bottom pneumatic discharge gate. 
5.Essential oil steam distill extractor process :flowers or natural product raw material are put into the inside shell extraction tank via top manhole of extraction tank ,the steam direct inlet from the bottom end of inside shell extraction tank ,the steam will be distill the flower (or natural product ) to take the essential oil out directly ,Turn on the cooling water to the condenser and chiller for the sub-cooler, so that the rising vapor state essential oil with water can be condensate via the condenser and sub-cooler ,the water with the oil mixture solution will enter into the oil/water separator unit ,the oil be collected and the water will be drain .after finished the extraction ,,the residue material will be discharge by opening the bottom pneumatic discharge gate. 
6.Essential oil extractor process by water vapor process :flowers or natural product raw material are put into the inside shell extraction tank via top manhole of extraction tank,the water charged from the inlet nozzle of extractor tank, and the jacket can be heating by steam ,Turn on the cooling water to the condenser and chiller for the sub-cooler, so that the rising vapor state essential oil with water can be condensate via the condenser and sub-cooler ,the water with the oil mixture solution will enter into the oil/water separator unit ,the oil be collected and the water will be drain .after finished the extraction ,the residue material will be discharge by opening the bottom pneumatic discharge gate. 
7..Essential oil extractor by solvent process :flowers or natural product raw material are put into the inside shell extraction tank via top manhole of extraction tank,the solvent (like ethanol ,.acetone etc)charged from the inlet nozzle of the extractor tank , which must be sealed, and the jacket can be heating by steam . Turn on the cooling water to the condenser (sub-cooler), so that the rising vapor state solvent can flow back into liquid solution after passing through the condenser to maintain circulation and temperature.after the extraction process ,the extraction solution will be transferred out from the bottom filter net of the extractor tank to the storage tank or concentrator unit by transfer pump ,the essential oil with the solvent mixture solution will be evaporated in the concenentrator ,the heating tank of the concentrator unit will be heating by steam and keep the inside mixture solution will be keep the solvent boiling temperature ,the solvent will be vapor and cooling by the condenser ,the solvent will be collect in the solvent storage tank ,the essential oil (product ) will be get from the concentrator unit .after finished the extraction and concentrator ,the residue  raw material will be discharge by opening the bottom pneumatic discharge gate. Of extraction tank  
 

Advantage

1. This machine not only can fit to the organic solvent thermal reflux process,but also it can fit water thermal reflux extractor in the vacuum&low temperature condition.
2. This machine resolve the problem of the reflux process under high temperature in long time.
3.It can save the extraction time ,due to the thermal reflux extraction ,the hot liquid will extraction the raw material very fast and effective
4.It can save the feeding solvent (water) quantity,so can reduce the evaporator machine capacity and can make the energy saving ,for the batch extraction tank ,the solvent or water need extraction 2-3 times for each batch raw material ,for this type extraction machine ,one batch can only need extractor time
5.Easy operation and easy maintain 
6.Save the plant room space as this design structure.
 

Company Profile

 

 

 

 

 

 

 

FAQ

Q	Are you a factory or a trading company?
A	We are a manufacturer. Our company specializes in producing and manufacturing industrial machinery, including stainless steel reactors, evaporators, crystallizers, distillers, and complete production lines for various applications such as fruit juice and herbal essential oil extraction. By maintaining our own manufacturing facilities, we ensure high-quality control, competitive pricing, and the ability to customize equipment to meet our clients' specific needs.
Q	Do you do OEM and ODM service?
A	Yes,we do,we can make the equipment as per your drawing,or you give us the technical requirements,we can help design as well.
Q	How will your company control the equipment quality?
A	We have a rigorous quality control process that includes: 1)Use of high-quality materials and components. 2)In-house testing and inspection at various stages of production. 3)Compliance with industry standards and certifications. 4)Continuous improvement and adherence to best manufacturing practices.
Q	Do you supply installation equipment overseas?
A	Yes, we offer comprehensive installation and training services to ensure the smooth operation of our equipment. Our technical team can assist with on-site installation, and we provide detailed training for your staff on equipment use and maintenance.